1. Choose the size first
Size decides which keys you have, how much desk space the board takes, and how far your mouse hand has to travel. It is also the decision you cannot change later without buying a new keyboard, so start here.
- Full-size: everything, including the number pad. Right for spreadsheets and data entry.
- 96%: keeps the number pad in a compressed body.
- TKL: drops the number pad, keeps everything else. A classic for gaming and general use.
- 75%: keeps the function row and arrows in a tighter layout.
- 65%: drops the function row, keeps the arrows. The most popular enthusiast size.
- 60% and smaller: arrows and more move to a function layer. Compact but takes adjustment.
A simple test: think about the keys you used today. If you used the number pad, keep it. If you used the arrows a lot, do not go below 65%. The keyboard sizes guide compares all of them with rendered layouts and real dimensions, and the keyboard builder lets you design a board in any of these sizes.
2. Choose a switch type
Switches set how every key feels and most of how the board sounds.
- Linear: smooth, no bump. Popular for gaming and for people who like a consistent stroke.
- Tactile: a bump before the key registers. A good default for typing.
- Clicky: a bump plus a click. Satisfying, but loud.
- Silent: dampened linears or tactiles for shared spaces.
If you have no idea, read red vs brown vs blue switches, then open the keyboard simulator and type on a few switches. The sounds are simulated rather than recorded, but they are enough to tell whether you lean toward quiet and smooth or loud and clicky. The switch weights guide covers how heavy to go.
3. Insist on hot-swap
A hot-swap board has sockets that hold the switches, so you can pull them out and push new ones in without soldering. It means your first switch choice is not final, a broken switch is a ten-second fix, and you can try new switches for the price of a small pack. For a first mechanical keyboard, it is the single most useful feature. Check whether the sockets accept 3-pin and 5-pin switches; our guide to hot-swap vs soldered explains the difference, and how to swap switches shows the process.
4. Check the parts that are hard to fix later
Stabilizers. The wires under the spacebar, Enter, Shift and Backspace. Poor stabilizers rattle, and on many budget boards they are the most noticeable flaw. Reviews that include a sound test are the best way to judge them. Our stabilizers guide explains what to listen for.
Case and mounting. A solid case with foam inside sounds fuller than a hollow plastic one. Gasket-mounted boards tend to feel softer and sound more muted than tray-mounted ones. See gasket vs tray mount and what is case foam.
Plate. The plate material changes pitch and flex. See plate materials and sound.
5. Keycaps
Stock keycaps are easy to replace later, so they should not decide your purchase, but a few things are worth checking. PBT keycaps resist shine better than thin ABS. Doubleshot or dye-sublimated legends last longer than printed ones. And if you plan to buy aftermarket keycaps, make sure the board uses a standard layout, especially the bottom row. See ABS vs PBT, doubleshot vs dye-sub and keycap profiles.
6. Layout standard: ANSI or ISO
If you type in a language that uses an ISO layout, such as most European layouts with the tall Enter key, make sure the board is sold in ISO, and that any keycaps you buy later support it. Our guide to ISO vs ANSI shows how to tell which you have.
7. Connection
Wired is simple and never needs charging. A 2.4 GHz wireless dongle is fast enough for most gaming. Bluetooth is convenient for switching between devices but usually adds a little latency. Many boards offer all three. If battery life matters, note that lighting drains it quickly.
8. Software and firmware
Keyboards that support QMK or VIA let you remap any key, build layers and set macros from a simple app, without vendor software running in the background. That matters more on smaller boards, where you will rely on layers. See QMK and VIA explained. If you play games that need many keys at once, also check for N-key rollover; see what is NKRO.
9. Test it when it arrives
When the board arrives, run every key through the keyboard tester, check rollover with the ghosting test, and press a few keys repeatedly in the chatter test. Return windows are short, and a dead key or chattering switch is much easier to sort out in the first week.
A sensible default
If you want one recommendation without the research: a 65% or 75% hot-swap board with foam in the case, reasonably good stock stabilizers, PBT keycaps, and factory-lubed linear or tactile switches in the 55 to 65 g range. Every part of that can be changed later except the size, which is why size comes first.
Frequently asked questions
What should I look for in my first mechanical keyboard?
A size you will actually use, hot-swap sockets so you can change switches later, and a switch type that fits how you type. Beyond that, good stabilizers and a solid case matter more than features such as RGB. A hot-swap board with decent stabilizers is the safest first purchase.
What size mechanical keyboard should I get?
If you use the number pad, get a full-size or a 96%. If you do not but want arrows and a function row, a TKL or 75% saves space without much compromise. If you want the most desk space and accept a function layer, a 65% keeps the arrows and is the most popular enthusiast size.
Is hot-swap worth it?
For most people, yes. Hot-swap sockets let you replace switches without soldering, so you can try new switches, fix a failed one in seconds, and change the feel of the board later. The only reasons to skip it are a specific soldered layout you want or a strong preference for the feel of a soldered build.
Wired or wireless mechanical keyboard?
Wireless is convenient and modern 2.4 GHz connections are fast enough for most gaming. Bluetooth adds a little latency and is better suited to typing and multiple devices. Wired is simpler, never needs charging, and is the safest choice for competitive play. Many boards offer all three.
Keep learning
- Mechanical vs membrane keyboards.
- Keyboard sizes and layouts.
- Switch types explained.
- Design a build in the keyboard builder, then hear its switch in the simulator.