Skip to content
keyboardsimulators

Doubleshot vs dye-sub keycaps

The way the letters get onto a keycap decides whether they will still be there in two years. This guide explains the five common legend methods, what each one can and cannot do, and how to spot them in a product listing.

Keycap discussions usually focus on plastic (ABS vs PBT) and shape (profiles). The legend method is the third decision, and the one that most affects how a set ages. A legend can be part of the plastic itself, absorbed into it, or printed on top. Only the first two survive heavy use.

Doubleshot

A doubleshot keycap is molded in two stages from two plastics. The first shot forms the legend, the second forms the body around it, so the letter runs through the cap as a separate piece of plastic. The legend cannot wear off, because there is nothing on the surface to wear. If the surface wears down, the legend is still there underneath.

  • Legends: very sharp edges, any color combination, including light legends on dark caps.
  • Backlighting: using a translucent plastic for the legend creates shine-through keycaps for RGB boards.
  • Plastics: traditionally ABS, and many famous enthusiast sets are ABS doubleshot. PBT doubleshot exists and is common in modern sets too.
  • Limits: each color in the legend needs its own mold shot, so multicolor designs and novelty art are limited and tooling is expensive.

Dye-sublimation

Dye-sublimation uses heat to turn dye into a gas that is absorbed into the surface layer of the plastic. The legend becomes part of the keycap rather than a coating on it, so it does not rub off.

  • Plastics: best on PBT, which tolerates the heat. ABS tends to deform, so dye-sub ABS is rare.
  • Colors: dye can only darken plastic, so the classic combination is dark legends on light caps. Light legends on dark caps are generally not possible with standard dye-sub.
  • Designs: multiple colors and fine artwork are possible in one process, which is why many themed PBT sets use it.
  • Sharpness: very good, though edges can be slightly softer than doubleshot.
  • Backlighting: no shine-through, because the cap is opaque.

Laser etched and laser engraved

A laser burns or engraves the legend into the surface. Laser etching darkens the plastic; laser engraving cuts a shallow channel, sometimes filled with paint. These legends last much longer than printed ones, but they can look less crisp and may change appearance as the surface wears. Laser-etched legends are common on budget PBT keycaps and on shine-through caps where a coating is removed to reveal translucent plastic underneath.

Pad printed

Ink is stamped onto the surface with a silicone pad. It is cheap and quick, and it is the method most likely to wear off: frequently used keys such as WASD and the spacebar can lose their legends with heavy use. Pad printing is common on budget keyboards and on the side-printed legends of some sets.

UV printed

A UV-cured ink or coating is printed onto the surface. It allows full color and detailed artwork, so it is used for novelty keycaps and artistic sets. Durability depends heavily on the quality of the coating. Good UV printing holds up well; cheap UV printing can wear like pad printing.

Comparison

Method Wears off? Light on dark Shine-through Multicolor art
DoubleshotNoYesYesLimited
Dye-subNoGenerally noNoYes
Laser etchedSlowlyVariesYes, with coated capsNo
Pad printedYesYesNoLimited
UV printedDepends on qualityYesNoYes

How to tell from a listing or in your hand

  • Look at the inside of the cap. On many doubleshot caps you can see the legend plastic from underneath.
  • Run a fingernail over the legend. A raised edge suggests a printed coating; a perfectly flush legend is doubleshot, dye-sub or laser.
  • White or light legends on black PBT are usually doubleshot or laser, not dye-sub.
  • Shine-through caps are doubleshot or laser-etched coated caps.

Which should you buy?

For a set that will last, choose doubleshot or dye-sub. Pick doubleshot if you want light legends on dark keys or backlight shine-through. Pick dye-sub PBT if you like light keycaps with dark or colorful legends and want PBT's texture. Avoid pad-printed caps for keys you use constantly. You can preview colorways and keycap profiles in the keyboard builder before choosing a set.

Frequently asked questions

Is doubleshot or dye-sub better?

Both produce legends that will not wear off in normal use, because the legend is part of the plastic rather than printed on top. Doubleshot gives the sharpest legends and allows light legends on dark keys and shine-through backlighting. Dye-sub is usually done on PBT, works best with dark legends on light keys, and can produce multicolor designs. Choose by the look you want.

Do dye-sub legends fade?

Not from typing. The dye is absorbed into the plastic rather than sitting on the surface, so the legend does not rub off. Very long exposure to strong sunlight can fade colors over years, as with most dyed plastics, but finger wear is not a concern.

Which keycap legends wear off?

Pad-printed legends, which are ink on the surface, wear fastest and can rub off on frequently used keys within months or years. Laser-etched legends last longer but can lose sharpness. UV-printed legends vary with the quality of the coating. Doubleshot and dye-sub legends do not wear off from typing.

Can you get shine-through dye-sub keycaps?

Not in the usual sense. Shine-through keycaps need a translucent legend that light can pass through, which is what doubleshot molding provides. Dye-sublimation colors the surface of an opaque cap, so light does not pass through the legend.

Keep learning