What polling rate means
A USB keyboard does not push key presses to the computer the instant they happen. The computer asks the keyboard for its state at a fixed interval, and the keyboard answers with whatever has changed. The number of times per second this happens is the polling rate, measured in hertz.
| Polling rate | Interval | Worst-case wait | Typical use |
|---|---|---|---|
| 125 Hz | 8 ms | up to 8 ms | Older and basic keyboards |
| 500 Hz | 2 ms | up to 2 ms | Some keyboards and wireless modes |
| 1000 Hz | 1 ms | up to 1 ms | Standard for gaming keyboards |
| 4000 Hz | 0.25 ms | up to 0.25 ms | High-end gaming |
| 8000 Hz | 0.125 ms | up to 0.125 ms | High-end gaming |
On average a press waits about half the interval, so the average saving from 125 Hz to 1000 Hz is roughly 3.5 ms, and from 1000 Hz to 8000 Hz roughly 0.4 ms.
Where polling fits in total input lag
From your finger to a change on screen, a key press passes through several stages:
- Switch travel to the actuation point, which depends on the switch and how fast you press.
- Debounce in the keyboard firmware, waiting for the contacts to settle. Often a few milliseconds on mechanical switches. See key chatter explained.
- Polling, waiting for the next USB report.
- Operating system and application processing the event.
- The game or app rendering a frame that reflects it.
- The display scanning out that frame, which at 60 Hz alone is 16.7 ms per refresh.
At 1000 Hz, polling is one of the smallest parts of that chain. Display refresh and the game's frame timing are usually larger. That is why a 144 Hz or faster monitor often makes a bigger difference to how responsive a game feels than going from 1000 Hz to 8000 Hz on the keyboard.
Wireless and Bluetooth
Wireless keyboards add their own link between the board and the computer. A dedicated 2.4 GHz dongle on a modern gaming keyboard can be close to wired performance. Bluetooth is designed for compatibility and battery life rather than low latency, and usually adds more delay. Many wireless boards also lower their polling rate to save battery. For competitive play, use the wire or the dongle.
Who should care
- Typists: 125 Hz is fine. You cannot feel a few milliseconds while typing prose.
- Most gamers: 1000 Hz is the sensible default and is standard on gaming keyboards.
- Competitive players: higher rates are a small, real improvement, best combined with a fast display and features like rapid trigger.
Very high polling rates increase the work the computer does handling USB reports. On some systems 8000 Hz causes stutter in games, which defeats the purpose. If you see that, drop to 4000 or 1000 Hz.
Why a website cannot measure it
A web page only sees a key press after the keyboard has been polled, the operating system has processed the report and the browser has dispatched the event. It has no way to see when the keyboard was polled, so browser-based "polling rate tests" for keyboards are not reliable. Check the polling rate in the keyboard's software or specifications.
What a browser can measure is the part of input lag that happens inside the browser itself. The keyboard latency test reports event dispatch delay and the wait for the next frame, and is upfront about the parts of the chain it cannot see.
How to change your polling rate
Most gaming keyboards set polling rate in their companion software, sometimes with a key combination on the board. Boards running QMK firmware set the USB polling interval in the firmware; see QMK and VIA explained. If you cannot find the setting, the keyboard probably runs at a fixed rate.
Frequently asked questions
What is a good polling rate for a keyboard?
1000 Hz, which means the computer checks the keyboard every millisecond, is the common standard for gaming keyboards and is plenty for almost everyone. 125 Hz, an 8 ms interval, is the old USB default and is fine for typing. Higher rates such as 4000 or 8000 Hz shave fractions of a millisecond and matter mainly to competitive players.
Does a higher polling rate reduce input lag?
It reduces one part of it. At 125 Hz a key press can wait up to 8 ms to be reported; at 1000 Hz, up to 1 ms. Total input lag also includes debounce, the game, the operating system and the display, and some of those are much larger than the polling interval at 1000 Hz.
Can a website test my keyboard polling rate?
Not reliably. A browser receives key events after the operating system has processed them, and it cannot see when the keyboard was polled. Polling rate is best checked in the keyboard's own software or specifications.
Does a high polling rate use more CPU?
Somewhat. Very high rates such as 8000 Hz mean the computer handles many more reports per second, which can raise CPU use and, on some systems, cause stutter. At 1000 Hz the overhead is negligible on modern computers.