Skip to content
keyboardsimulators

Drop + Invyr Holy Panda vs Community Holy Panda (Original Frankenswitch)

The Drop + Invyr Holy Panda and the Community Holy Panda (Original Frankenswitch) match on every force figure either brand publishes, which makes this a comparison of everything the spec sheet does not measure. Our switch library puts these two on each other's shortlist, and the player below is the fastest way to settle it: match the volumes, then work down through the table and the verdict.

Hear them back to back

simulated from real specssound loads on your first tap
Typing box plays:

Shortcuts: press A or B anywhere outside a text box to fire that burst. Use the volume trims to loudness-match the pair before judging which sounds better.

Spec by spec

Spec Drop + Invyr Holy Panda Community Holy Panda (Original Frankenswitch)
Type Tactile Tactile
Brand rates force at bottom-out bottom-out
Actuation force 60 g 60 g
Bottom-out force 67 g 67 g
Pre-travel 2 mm 2 mm
Total travel 4 mm 4 mm
Silent (dampened) No No
Factory lubed No No
MX-compatible stem Yes Yes
Price tier Premium Premium
Street price varies varies

Drop and Community both advertise a bottom-out force, so the two headline figures in this table are measured at the same point and can be read against each other.

Verdict

Stroke character is a tie. Two tactiles feel alike under a finger, which pushes the decision onto the rows the spec sheet cannot fill in. Weight is a wash: the two are rated identically at actuation and at bottom-out. Their voices split them more than their specs: the Drop + Invyr Holy Panda sounds like thocky bottom-out with a hint of stock scratch, while the Community Holy Panda (Original Frankenswitch) gives you deep rounded thock with a snappy tactile knock. By use case, then: the Drop + Invyr Holy Panda for gaming and a shared office, the Community Holy Panda (Original Frankenswitch) for typing.

Force curves

Drop + Invyr Holy Panda

Force curve (illustrative, from published specs)
29g 58g 4mm travel 60g @ 2mm 67g bottom-out

Community Holy Panda (Original Frankenswitch)

Force curve (illustrative, from published specs)
29g 58g 4mm travel 60g @ 2mm 67g bottom-out

Drop + Invyr Holy Panda or Community Holy Panda (Original Frankenswitch): the long answer

Read the spec sheet once, carefully, and most of this decision makes itself. Weight settles nothing: 60 g at actuation and 67 g at bottom-out, identical on both. Type is not in play. Both are tactiles, and each one puts a felt event in the middle of the stroke. The two stroke depths are identical, 2.0 mm to actuation inside 4.0 mm of total travel. With the stroke and the rated weight both matched, this comes down to sound and to how each one is built.

What the table cannot tell you is how either one lands in a room. Played back to back, the Drop + Invyr Holy Panda is thocky bottom-out with a hint of stock scratch against deep rounded thock with a snappy tactile knock from the Community Holy Panda (Original Frankenswitch). One caveat we repeat wherever a player appears: no studio recording sits behind either of these. They are built from what each maker publishes and what the community reports.

On cost and convenience, both are premium priced. Neither ships lubed, so budget an evening with a brush if you want either at its best.

All three questions get different answers on this pair. Fast inputs: the Drop + Invyr Holy Panda, because this axis is nearly a tie, and it comes out ahead only once the scoring is added up. A long draft: the Community Holy Panda (Original Frankenswitch), since its keystroke stays consistent and comfortable across a full day of writing. A room with other people in it: the Drop + Invyr Holy Panda, as it is the quieter of the two once the room is listening. Whichever way you land, listen to both above with the volume trims matched before you spend anything.

Want the full story on either switch? Read the dedicated Drop + Invyr Holy Panda page and the Community Holy Panda (Original Frankenswitch) page. Or leave switches aside for a minute and run your current keyboard through the free keyboard tester.

Frequently asked questions

Drop + Invyr Holy Panda or Community Holy Panda (Original Frankenswitch) for gaming?

We pick the Drop + Invyr Holy Panda for gaming. This is close to a coin toss. The scoring hands it over by a margin you would not feel in a match.

Which of the Drop + Invyr Holy Panda and the Community Holy Panda (Original Frankenswitch) is quieter in a shared room?

They are close. Neither is a silent switch and neither clicks, so loudness depends mostly on how hard you bottom out and the board they sit in. Their character differs though: the Drop + Invyr Holy Panda leans toward thocky bottom-out with a hint of stock scratch, while the Community Holy Panda (Original Frankenswitch) is deep rounded thock with a snappy tactile knock.

Drop + Invyr Holy Panda vs Community Holy Panda (Original Frankenswitch): which one is the heavier press?

Neither: they are rated the same at actuation and at bottom-out (60 g at actuation), so the springs really are the same weight and any difference in feel comes from the stroke, not the spring.

Are the Drop + Invyr Holy Panda and the Community Holy Panda (Original Frankenswitch) the same switch?

Not the same, but the spec sheet cannot tell them apart on weight: they match at every published force figure. They come from Drop and Community respectively, built in different factories to the same numbers. Compare the travel rows and the two sound packs above, because that is where the difference actually lives.

More comparisons

Or browse every switch comparison on the site.