Outemu Black
LinearOutemu's heavy linear: a 60g MX Black clone for typists who bottom out hard. Cheap by the bag, and the stiffer spring actually masks some of the stock scratch.
Sound & feel
Outemu Black takes the classic heavy-linear formula (60g actuation, roughly 80g at the bottom) and delivers it at pocket-change pricing. Heavier springs naturally hide slider scratch, so Blacks often feel more composed stock than their Red siblings. The 80g is Milktooth's figure and the one most sellers repeat; the Switch Library reads it nearer 70g, and Outemu itself publishes only the 60±15gf operating force.
It is a sensible pick for heavy-handed typists on a strict budget, or as filler switches for macro pads and secondary boards. As with all Outemu stock, expect 3-pin plate mount and check hot-swap socket compatibility before ordering.
Sound on this page is synthesized from the switch's published specs and community-documented character: an honest simulation, not a recording. We're progressively replacing simulations with our own studio recordings. How our sounds are made
Compare it
- Outemu Black vs Cherry MX Black MX2A , or jump to Cherry MX Black MX2A
- Outemu Black vs Gateron Black , or jump to Gateron Black
- Outemu Black vs Outemu Red , or jump to Outemu Red
Frequently asked questions
What does the Outemu Black sound like?
firm mid-pitched budget clack. Use the player on this page to hear simulated press and release sounds derived from its real specifications.
Is the Outemu Black good for gaming or typing?
As a linear switch with 60g actuation force and 2mm pre-travel, it suits fast, repeated presses, which is why linears are a common gaming pick. It types perfectly well too if you like a smooth, uninterrupted keystroke.
How heavy is the Outemu Black?
60g actuation, 80g bottom-out (our estimate). Note that Outemu officially rates actuation force and publishes no bottom-out, so the bottom-out above is our derivation. Brands differ, so check the basis when comparing switches.